| Quantity: | |
|---|---|
SF-SWAF10MM-A2
SINCEREFIRST
| The 10mm Diameter 5MP Autofocus USB2.0 Side View Endoscope Camera Module with 6 LEDs where target distance changes during use. Autofocus reduces the need to pre-select one fixed working distance, while six white LEDs provide local illumination around the imaging area. The module supports YUV/MJPG output and multiple image resolutions up to 2592×1944. Its 73° FOV provides a more focused view than the ultra-wide models in this set, making it a practical direction for larger-bore inspection devices that prioritize focus flexibility and captured detail over minimum diameter. Difference: Autofocus is the key reason to choose this 10mm 5MP model when target distance varies during inspection and the device can accommodate a larger illuminated module. |  |
Selection Requirement | Standard Configuration | Selection Note |
Available Diameter | Ø10mm module | Confirm the device can accommodate the larger front-end size and total module geometry. |
Target Distance Variation | Autofocus | Use this model when the working distance changes enough that fixed-focus versions become inconvenient. |
Detail Requirement | 5MP; up to 2592×1944 | Use it when captured image detail is important after focus is established. |
Lighting | 6 white LEDs | Confirm the fixed LED arrangement suits the target reflectivity and working distance. |
Viewing Coverage | 73° FOV | Use it when a more focused field is preferred over very wide cavity coverage. |
Host / Power | USB2.0; 140–150mA working current | Confirm USB host behavior and power budget in the final device. |
1. 5MP Resolution for Detailed Visual Observation: The 5MP imaging capability provides higher image detail for component observation, assembly checking, text capture, and other close-range inspection tasks. It is suitable for projects where a basic low-resolution camera does not provide enough visual detail.
2. Autofocus for Variable Working Distances: The AF design is useful when the target-to-camera distance changes during normal operation.Compared with a Fixed Focus module designed around one defined working distance, this model is better suited to handheld inspection tools and observation systems that need more flexible focusing behavior.
3. Compact Ø10 mm Camera Head: The circular Ø10 mm front-end structure helps simplify integration into compact devices, narrow installation openings, and space-limited mechanical designs. This is an important advantage for equipment where a conventional rectangular camera PCB is difficult to install near the observation point.
4. Six White LEDs for Close-Range Illumination: Six white LEDs are integrated around the imaging area to support observation in darker device interiors and other close-range inspection conditions. LED brightness, color temperature, and control requirements should be evaluated according to the final application.
5. USB 2.0 with YUV and MJPG Image Formats: The module uses a USB 2.0 interface and supports YUV and MJPG formats. This makes it suitable for practical image acquisition applications using PC-based or embedded host systems. Host operating system compatibility, UVC support, and driver requirements should be confirmed according to the target platform.
6. 73° FOV for Balanced Observation Coverage: The 73° field of view provides a practical balance between scene coverage and target detail. It can be considered for compact inspection devices where the customer needs more coverage than a narrow-angle lens but does not require an ultra-wide-angle view.
Product Name | 5MP Side View Endoscope Camera Module |
Pixel | 5MP |
Working Current | 140mA-150mA |
Output Interface | USB2.0 |
| Fcous Mode | Auto Focus |
Image Sensor | CMOS |
Features | Mini Endoscope Camera |
| Format | YUV/MJPG |
Lens | FOV 73° 4P+RI |
Diameter | 10mm |
Led | 6PCS |
Warranty | 10 Years |
1. Autofocus Handheld Inspection Camera: Autofocus supports repeated changes in working distance while six LEDs provide local light. Confirm the 10mm module fits the handheld structure.
2. Large-Bore Cavity Inspection Device: The larger module size is acceptable in wider access paths, while 5MP capture supports detailed review. Confirm the target reflectivity under the six fixed LEDs.
3. Variable-Distance Equipment Inspection Tool: Autofocus helps when the operator alternates between near surfaces and deeper components. Confirm that the 73° view covers the required area.
4. Portable Inspection and Recording Terminal: Multiple supported resolutions and USB2.0 output suit devices that need both live viewing and captured records. Confirm host recognition, power budget and preferred output mode.
1. Diameter and Mechanical Space: If the Ø10mm module is too large for the final access path, an alternative diameter or mechanical direction can be evaluated. Please provide the available opening, front-end length, housing drawing and target application.
2. Viewing Coverage: If the 73° FOV does not cover the target correctly, the lens / FOV direction can be reviewed. Please provide the target size, typical working distance and required viewing area.
3. Six-LED Lighting: If the six-LED output is too strong, too weak or causes reflections, the lighting direction and control method can be reviewed where supported. Please provide the target reflectivity, working distance, brightness requirement and heat limit.
4.USB and Power Integration: If the USB or power arrangement differs from the standard design, the cable, connector and power direction can be reviewed. Please provide the host type, connector preference, cable length and available current budget.
1: Is the SF-SWAF10MM-A2 suitable for PC-based visual inspection systems?
It can be evaluated for PC-based inspection and observation systems because the module uses USB 2.0 and supports YUV and MJPG image formats. However, UVC support, driver requirements, and operating system compatibility are not specified in the current catalog. These points should be confirmed according to the target host platform.
2: Why would I choose this Autofocus model instead of a Fixed Focus camera module?
The AF design is more suitable when the target distance changes during use. This can be useful for handheld inspection equipment, maintenance tools, and observation systems where the operator may move the camera closer to or farther from the target.
A Fixed Focus model may be more suitable when the working distance is stable and clearly defined.
3: What is the advantage of the Ø10 mm camera head?
The Ø10 mm front-end structure is designed for compact mechanical integration. It is useful when the customer has a limited front opening or a narrow installation area near the observation point.
The complete installation depth and mechanical clearance should still be checked against the final device drawing.
4: What is the function of the six LEDs on this camera module?
The six integrated white LEDs provide close-range illumination for darker environments such as equipment interiors, maintenance inspection points, and enclosed observation areas.
The required brightness, color temperature, LED control method, and working distance should be evaluated according to the final application.
5: Can this module be used for barcode or QR code reading?
It can be evaluated for static or low-speed barcode and QR code reading applications because the module provides 5MP imaging and Autofocus.
For moving conveyor applications or high-speed scanning, the required frame rate, exposure conditions, shutter type, working distance, and decoding algorithm should be confirmed before selection.
6: Can the lens or FOV be adjusted for my project?
Lens and FOV requirements can be reviewed according to the target size, working distance, required observation area, and installation space.
The standard drawing specifies a 73° FOV. Other optical requirements should be discussed based on the actual application.
7: Is this model waterproof or suitable for wet inspection environments?
The current product drawing does not specify IP67 or another waterproof rating. Therefore, the standard module should not be described as waterproof based on the available information.
Environmental protection requirements should be reviewed according to the final Shell, sealing structure, cable design, and application conditions.
8: What information should I provide to confirm whether SF-SWAF10MM-A2 fits my project?
Please provide the target device type, host platform, minimum and maximum working distance, required FOV, target object size, installation opening, available installation depth, cable length, lighting environment, and expected application.
This information helps evaluate whether the standard SF-SWAF10MM-A2 is suitable or whether the lens, cable, connector, illumination, or mechanical structure should be reviewed for a customized version.
CTA◢
To evaluate the SF-SWAF10MM-A2, please share the available diameter, typical target-distance range, required viewing area, lighting condition, host system and power / cable requirements. We can then review whether this 10mm autofocus direction fits the inspection device.
