Views: 0 Author: Site Editor Publish Time: 2026-11-09 Origin: https://www.sony-semicon.com/cn/news/2026/2026102201.html
Shrinking an endoscope sensor to 1 mm solves only half the problem. Sony's IMX742 combines 720 × 720 imaging at 60 fps with digital transmission tested over 5 m. What does this mean for single-use endoscope camera integration?
Single-use bronchoscopes and ureteroscopes need compact distal tips, but size alone cannot ensure a useful image. Limited LED light, long narrow cables and electrical noise may undermine visibility even when the sensor fits.
Announced on October 22, Sony's IMX742 is a 1/17.7-type, approximately 0.51MP sensor in a 1 × 1 mm chip. It offers 720 × 720 at up to 60 fps and integrates A/D conversion to digitize the image at the sensor.
Sony's bidirectional link carries video and control over the same cable with a six-pin package. In Sony's evaluation using AWG44 cable, digital video remained stable over 5 m. This is a tested condition, not a guarantee for every endoscope assembly.
Sony scheduled sample shipments for November 2026; its published release does not establish that every customer can already obtain samples.
A 1 mm chip does not mean a 1 mm endoscope tip. OEMs still need to match lens coverage, viewing angle, working distance, illumination, cable routing and the host-side signal-processing architecture.
For a single-use medical endoscope, electrical safety, biocompatibility, sterilization and regulatory requirements must be verified at the final-device level. The same lens–light–cable trade-offs can inform industrial inspection probes, without assuming IMX742 is qualified for those uses.
The next design decision is not just sensor diameter—it is how far a clean image can travel through the finished device.
Contact SincereFull to discuss endoscope camera module dimensions, illumination and system integration needs.