| Quantity: | |
|---|---|
SF-C50USB-D1.5
SINCEREFIRST
This 1.5mm Diameter OCHFA10 CMOS Sensor Ultra Wide Angle USB2.0 Interface Separate Endoscope Camera Module that must enter very small openings without giving up broad close-range coverage. Its 105° diagonal FOV and 5–50mm focus range support nearby internal observation, while 700×700@30fps YUV/MJPEG output provides a practical image format for compact inspection systems. The separated structure allows the imaging section and USB processing section to be arranged in different parts of the device. The standard configuration has no integrated LED, so it is best suited to equipment that already provides illumination or has space for a device-side light source. Difference: The 1.5mm diameter and 105° diagonal view make this model a stronger fit when the opening is extremely limited but the device still needs wider close-range coverage; built-in lighting is not part of the standard configuration. |  |
Selection Requirement | Standard Configuration | Selection Note |
Entry Space | 1.5mm diameter | Confirm clearance for the complete front-end structure, not only the optical opening. |
Viewing Coverage | D105° / H86° / V86° | Use this model when wider nearby coverage is more valuable than a narrower, more focused view. |
Target Distance | 5–50mm focus range | The target should normally remain inside this close-range working window. |
Lighting | No integrated LED | The final device needs external or device-side illumination in dark cavities. |
Host Connection | USB2.0 UVC; YUV/MJPEG | Confirm the target host can enumerate and process the required UVC stream. |
Device Layout | Separated structure; 2m standard cable | Confirm cable routing and board position early in the mechanical design. |
1.5mm Ultra-Micro Size: 1.5mm probe maximizes accessibility in tiny spaces, accessing ultra-thin channels.
Ultra-Wide Angle Coverage: Expands close-range single-frame coverage and reduces detection blind spots.
USB Driver-Free Integration: Built-in standard USB protocol, direct connection to devices, no extra drivers needed.
Separate Flexible Structure: Adapts to complex curved paths, enhancing installation flexibility in narrow deep cavities.
Product Name | 1.5mm Endoscope Camera Module |
Image Sensor | OCHFA10 CMOS Sensor |
Pixel | 0.5MP |
Diameter | 1.5mm |
| Focus Range | 5-50mm |
| Distortion | <-11% |
| Resolution | 700*700 |
View Angle | D105°*H86°*V86° |
F NO | 5.0 |
Output Format | YUY/MJEPG |
Focal Length | 0.418mm |
Interface | Micro USB |
Feature | Medical Endoscope Camera Module |
1. Micro-Bore Inspection Tool: The 1.5mm diameter supports access through very small bores, while the 105° view helps cover more of the nearby inner surface. Confirm the final entry clearance and provide external illumination if the bore is dark.
2. Precision Component Inspection Fixture: The 5–50mm focus range suits close observation of small assemblies, solder areas or mechanical details. Confirm that the target remains within the close-range optical window.
3. Miniature Equipment Cavity Inspection Device: The separated structure helps place the imaging section in a tight cavity while locating the processing board farther back. Cable routing and board space should be checked against the device drawing.
4. Laboratory Observation Fixture: USB2.0 UVC output supports image acquisition in compact research or test fixtures. The fixture should provide suitable illumination because the standard module has no LED.
1. Mechanical Fit: If the standard 1.5mm layout does not fit the available routing space, cable length, board placement and connector arrangement can be reviewed. Please provide the available front-end space, board position, cable path and preferred connector.
2. Viewing Coverage: If the 105° view is wider than needed or does not cover the target correctly, the lens / FOV direction can be evaluated. Please provide the target size, target distance and required viewing area.
3. Working Distance: If the standard 5–50mm focus range does not match the inspection distance, an alternative optical direction can be reviewed. Please provide the nearest and farthest target distance and whether the target moves during use.
4. Lighting: The standard version has no integrated LED. If the device needs illumination, device-side lighting or an alternative illuminated configuration can be evaluated. Please provide the cavity brightness, target reflectivity and available lighting space.
1. When is this 1.5mm model a better choice than a larger OCHFA10 module?
Choose it when the available entry diameter is the first mechanical constraint and the device can supply its own illumination.
2. Does the 105° FOV mean the whole image is equally useful at every distance?
No. FOV describes coverage, while usable detail still depends on target distance, lens characteristics and the final lighting condition.
3. Does this model include LEDs?
No. The standard configuration has no integrated LED.
4. What target distance should I design around?
The confirmed focus range is 5–50mm.
5. What should I send for sample evaluation?
Please provide the available entry diameter, target distance, required viewing coverage, lighting method, cable routing and host interface.
CTA◢
To evaluate this 1.5mm OCHFA10 module, please share the available entry diameter, target distance, required viewing coverage, lighting method, cable routing and host system. We can then review whether the standard configuration fits or whether another optical or illuminated direction should be evaluated.
