Learn MTF testing for endoscope camera modules: eliminate subjective bias and ensure clinical-grade sharpness.
Master USB UVC endoscope camera module integration. Solve thermal, power, and interface challenges for flawless medical and industrial designs.
Master endoscope AEC/AGC tuning to prevent motion blur, glare, and noise in low-light imaging. Learn how to evaluate camera module ISP performance.
What limits a miniature endoscope: camera size or the space needed for light? OMNIVISION and Myriad Fiber Imaging's VINERA platform pairs compact imaging with a 100 µm laser illumination fiber, raising a new question for endoscope camera integration.The Smaller-Tip DilemmaA smaller endoscope tip lea
Shrinking an endoscope sensor to 1 mm solves only half the problem. Sony's IMX742 combines 720 × 720 imaging at 60 fps with digital transmission tested over 5 m. What does this mean for single-use endoscope camera integration?Smaller Tips Need More Than Smaller SensorsSingle-use bronchoscopes and ur
OMNIVISION has announced several new OVMed® ultra-thin medical-grade LED cable modules for single-use endoscopes. The new solutions integrate an image sensor, wafer-level optics, mini-LED illumination and cabling, targeting manufacturers that need compact chip-on-tip imaging and a shorter developmen
Endoscope camera flicker? Diagnose root causes—PWM, AC interference, USB power drops—and source stable LED modules.
Stop guessing defect severity. Discover how low-distortion industrial endoscope camera modules ensure precise, sub-millimeter NDT measurements.
Trying to run dual USB endoscope cameras on one host? Solve bandwidth limits, VID/PID conflicts, and power issues for reliable multicam inspection.
Prevent diagnostic errors in NDT and medical imaging. Discover how to calibrate white balance on endoscope camera modules for true color accuracy.
Stop rolling shutter 'jello effect' in miniature endoscope cameras. Compare hardware, ISP, and procurement strategies for zero-distortion imaging.
| Availability: | |
|---|---|
| Quantity: | |
SF-SPA65-3A34
SINCEREFIRST
The SF-SPA65-3A34 is a three-camera USB endoscope module designed for inspection tasks where both viewing direction and target distance vary inside the same cavity. Its three cameras use different best-focus distances—5cm, 4cm and 3cm—so the module can be evaluated for multi-direction observation across staggered close-range target zones. It provides 1280×720 output at up to 15fps, a 76° view angle and 8+2 white SMD LEDs for enclosed inspection environments. Difference: Unlike a standard three-view module with one common focus direction, this model adds three defined focus zones to better match targets positioned at different distances around the inspection assembly. | ![]() |
Selection Requirement | Standard Direction | Selection Note |
| Viewing Requirement | Three cameras | Use when the device must observe multiple directions within one insertion structure. |
| Target Distance | A: 5cm / B: 4cm / C: 3cm | Choose this model when different target surfaces sit at different close-range distances. |
| Image Output | 1280×720, up to 15fps | Suitable when multi-zone coverage is more important than high frame rate. |
| View Angle | 76° | Confirm the required local coverage for each camera. |
| Lighting | 8+2 white LEDs | Check whether the lighting distribution matches the front and side target surfaces. |
| Mechanical Envelope | 27 × Ø7.9mm | Confirm the device can accommodate the multi-camera housing. |
· Three Defined Focus Zones — match nearby target surfaces positioned at approximately 3cm, 4cm and 5cm.
· Triple-View Architecture — covers multiple internal directions in one inspection assembly.
· 720P Image Output — provides practical image detail for multi-surface observation.
· 8+2 White LEDs — distribute illumination around the multi-camera structure.
· USB2.0 Interface — provides a digital host integration path for OEM inspection equipment.
In many cavities, the front target and side walls are not the same distance from the inspection assembly. This model addresses that geometry by assigning different best-focus distances to the three cameras. It is more appropriate when the target layout is uneven in depth; if all surfaces sit at one common distance, a simpler three-view configuration may be sufficient.
Product Name | 3.9mm Diameter USB2.0 Endoscope Camera Module |
F.NO | 4.8 |
| Focus Length | 1.35mm |
| Resolution | 720P |
| Sensor Type | OV9734 |
| Function | Support UVC Protocol IOS |
FOV(D) | 105°*90°*60° |
Waterproof | IP67 |
Focusing Range | 10mm~100mm |
Diameter | 3.9mm |
| Distortion | <-6% |
Output | USB2.0 UVC |
Connector Type | Type-C |
Output Format | YUV/MJPEG |
Brand | Sincerefirst |
· Multi-Depth Borescope — Suitable when front and side inspection surfaces are positioned at different close-range distances.
· Pipe Junction and Branch Inspection Tool — The three viewing directions and staggered focus distances can help observe a central path plus nearby side-wall features.
· Mechanical Cavity Inspection Device — Useful for internal structures where multiple surfaces cannot all be placed at one common working distance.
· OEM Three-View Inspection System — Can be integrated into equipment that needs predefined close-range focus zones for different camera directions.
· Focus mapping: If the 3cm/4cm/5cm arrangement does not match the device geometry, provide the required distance for each camera direction so the optical plan can be evaluated.
· Camera direction: Provide the target orientation around the probe if the standard three-view arrangement does not align with the device.
· Lighting balance: Provide reflectivity and distance for each target surface so the 8+2 LED distribution can be reviewed.
· Mechanical and USB integration: Provide the available Ø7.9mm housing space, insertion length, cable route and host layout.
Final configuration should be confirmed through engineering review and sample verification before mass production.
Why use three different focus distances?
Because the front target and side surfaces may sit at different distances inside the same cavity.
Is this model better than a standard three-view camera for every project?
No. The staggered focus zones are useful only when the target geometry actually needs them.
What are the best-focus distances?
5cm for Camera A, 4cm for Camera B and 3cm for Camera C.
What is the maximum frame rate?
15fps at 720P.
What should be supplied before sampling?
Target direction, distance for each camera, available housing size, lighting conditions and USB host information.
Please send a simple cross-section of the inspection area showing the target direction and distance for each camera. With the available Ø7.9mm space, lighting condition and USB host information, we can evaluate whether the 3cm/4cm/5cm focus layout matches the device.