| Quantity: | |
|---|---|
SF-C1019USB-D6.0-SV-L200-95D V1.0
SINCEREFIRST
| The 6mm OV9734 IP67 Side-View USB Endoscope Camera Module for inspection devices that need lateral wall imaging together with a protected steel-shell front-end structure. It supports 720P@30fps YUV/MJPEG output, D95° field of view and a 10–100mm focusing range for nearby pipe walls, bore surfaces and internal equipment walls. The steel-shell configuration supports IP67 protection for projects that require a more protected front-end structure than a bare or standard side-view module. Difference: Unlike the standard side-view page, this URL should be selected when lateral inspection and steel-shell/IP67 protection are both part of the device requirement. |  |
Selection Requirement | Standard Configuration | Selection Note |
Inspection direction | Side-view / lateral target | Use this model when the target is on a pipe wall, bore wall or cavity side. |
Protection requirement | Steel shell with IP67 support | Use this protected direction when the device needs a sealed front-end structure for humid, dusty or splash-prone environments. |
Available diameter | 6.0mm | Confirm full clearance for the protected front-end assembly. |
Working distance | 10–100mm | Confirm the expected wall-to-camera distance falls inside the standard range. |
Viewing coverage | D95° × H85° × V43.5° | Check that the lateral coverage suits the pipe or bore diameter. |
Host integration | USB2.0 UVC; YUV/MJPEG | Verify the USB host and cable architecture during sample testing. |
Product Name | ENDOSCOPE Camera Module |
Image Sensor | OV9734 |
Pixel | 1MP |
Focusing Range | 10-100mm |
Focal Length | 1.08mm |
F NO | 5.0 |
Product Type | Endoscope Camera Module |
Led | 0402 Led |
TV Distortion | <-10% |
Feature | Side-View Endoscope Camera Module |
4.Precision Equipment Sidewall Inspection： It can be used to inspect the sidewalls, solder joints and cable arrangement status inside electronic equipment and instruments; it is applicable because its 6.0mm miniature diameter improves the accessibility of detection in narrow spaces, and short-distance optimized imaging ensures clear display of tiny details.
Side View optical structure matching for different lateral inspection targets.
Steel Shell length adjustment based on insertion depth and device structure.
FOV & Focus Range review for different pipe sizes and wall distances.
LED configuration adjustment for darker cavities and close-range inspection.
Cable & connector adaptation for cable length and host-side connection requirements.
IP67 structure review based on the final Steel Shell assembly and sealing requirements.
FAQ
1: What is the main difference between this Side View model and a Direct View endoscope camera?
This model is designed to observe lateral internal surfaces such as cylinder walls, pipe walls, and bore surfaces. A Direct View model is more suitable for observing the forward insertion path.
2: What type of inspection device is this module suitable for?
It is suitable for side-view industrial borescopes, engine cylinder inspection tools, pipe wall inspection cameras, machined bore inspection devices, and equipment maintenance systems.
3: Does this model support IP67 protection?
Yes. The corresponding configuration is listed with IP67 support. Specific immersion depth, duration, and liquid environment should be confirmed according to the final project and sealing assembly.
4: What is the benefit of the 200mm Steel Shell structure?
The extended Steel Shell direction is useful for straight insertion and fixed-depth lateral inspection, especially when the target surface is located deeper inside a bore, cylinder, or cavity.
5: What image output does the module support?
It supports USB2.0 UVC output with YUV and MJPEG formats, up to 1280×720@30fps.
6: Does the module include illumination?
Yes. It uses 4pcs 0402 LEDs for close-range internal illumination. Dimming is not included in this configuration.
7: Is this model suitable for precision dimensional measurement?
It is mainly designed for visual observation and inspection. The listed TV distortion is <-10%, so precision dimensional measurement should not be treated as a default application.
8: What information should I provide to confirm whether this module fits my project?
Please share your target device, required viewing direction, access Diameter, insertion depth, working distance, FOV requirement, cable length, connector type, waterproof operating condition, and expected inspection target. This helps evaluate whether the standard configuration is suitable or whether a customized version should be reviewed.
CTA
Please send the pipe or bore diameter, target position, wall distance, available front-end space, moisture/dust exposure, sealing requirement, cable route and USB host information. We can then evaluate the protected side-view configuration for your device.
