| Quantity: | |
|---|---|
SF-C50USB-D1.6 with Shell
SINCEREFIRST
The 1.6mm Diameter 0.5MP 700×700 OCHFA10 USB IP67 Waterproof Endoscope Camera Module that need a very small entry diameter together with built-in front lighting. It provides 700×700@30fps YUV/MJPEG output, a 105° diagonal FOV and a 5–50mm focus range for broad close-range observation inside compact cavities. Four 01005 LEDs are integrated into the front section, and the confirmed product direction is listed with IP67. Compared with the 1.5mm OCHFA10 version, the main trade-off is a slightly larger diameter in exchange for integrated illumination and a protected-use configuration. Difference: Compared with the 1.5mm OCHFA10 version, this 1.6mm model adds four front LEDs and IP67 while keeping a micro-diameter structure for close-range inspection. |  |
Selection Requirement | Standard Configuration | Selection Note |
Entry Space | 1.6mm diameter | Confirm the complete front-end clearance; choose D1.5 if the smallest possible entry size is the first requirement. |
Lighting | 4×01005 LEDs | Use this model when the device needs its own compact front illumination. |
Target Distance | 5–50mm | The target should stay inside the confirmed close-range focus window. |
Viewing Coverage | 105° diagonal FOV | Confirm wide close-range coverage is appropriate for the target. |
Protection | IP67 listed | Confirm the final housing, cable exit and assembly maintain the required device-level sealing. |
Host / Layout | USB; separated structure; 2m standard cable | Confirm board placement, cable routing and host connection before sampling. |
Miniaturization + Durability: The 1.6mm lens with Steel Shell not only meets the penetration needs of extremely narrow spaces but also enhances shock and wear resistance through Steel Shell protection, avoiding the damage-prone issue caused by slim design and adapting to high-frequency use scenarios.
Multi-format HD Imaging: The 720P@30FPS frame rate ensures smooth images; the 1.008μm pixel size, combined with LED fill lights, can still capture clear details in low-light environments. Dual output formats can flexibly match the needs of real-time transmission (YUV) and high-definition storage (MJEPG), offering stronger practicality.
Full-Scenario Adaptability: The IP67 dustproof and waterproof design resists erosion by liquids and dust; the 5~50mm wide focusing range covers near and long-distance detection needs; the 86° FOV can fully present the detection area, balancing adaptability to complex environments and imaging integrity.
Quality + Compliance: Adopting SMT process and AA Active Alignment Process ensures consistency and precision in mass production. Full-series international certifications enable terminal products integrated with this module to enter major global markets without barriers, significantly reducing customers' market access threshold.
Ultra-Wide Angle Imaging: H86°/V86° field of view expands close-range coverage and reduces observation blind spots.
USB Direct Plug-and-Play: USB2.0 interface integrates power and signal transmission, adapting to mainstream devices and lowering integration thresholds.
Product Name | LED USB Endoscope Camera Module |
Focal Length | 0.418mm |
DSP | USB Board |
Sensor | OCHFA10 |
Focusing Range | 5-50mm |
Diameter | 1.6mm |
F Number | 5.0 |
LED: | 4pcs |
Resolution | 30fps |
FOV | H86°*V86° |
| Resolution | 700*700 |
| Interface | USB2.0 UVC |
| Waterproof | IP67 |
| Certificate | CE RoHS Reach |
1. Micro-Bore Industrial Inspection Tool: The 1.6mm diameter and four front LEDs support access and illumination in very small internal channels. Confirm the complete entry clearance and target distance.
2. Miniature Protected Cavity Inspection Device: The IP67 direction supports protected-use design while the LEDs provide local lighting. Final device sealing still depends on the complete housing and cable exit.
3. Compact Oral Visualization Device Development: The small diameter, close-range focus and integrated LEDs can be evaluated as an imaging component for compact oral visualization equipment. Final medical compliance remains a device-level responsibility.
4. Precision Equipment Micro-Inspection Probe: The 105° view and 5–50mm focus range support broad nearby observation of internal micro-features. Confirm that the target surface is not too reflective for the fixed lighting arrangement.
1. 1.6mm Mechanical Integration: If the standard 1.6mm front-end geometry does not match the device, the mechanical and shell direction can be reviewed. Please provide the opening diameter, assembly drawing and required sealed area.
2. LED Matching: If the standard LED brightness or arrangement does not match the target surface, the lighting direction and control method can be reviewed where supported. Please provide the target reflectivity, working distance and brightness requirement.
3. Optical Matching: If the 105° FOV or 5–50mm focus range is not suitable, the lens / optical direction can be evaluated. Please provide the target size, required viewing coverage and actual target distance.
4. Cable and Connector: If the standard cable or connector does not fit the device layout, cable length, connector and board placement can be reviewed. Please provide the host position, routing path, connector preference and available board space.
It is a D1.6 USB Endoscope Camera Module with a Separate type structure. It is designed for micro endoscope devices, close-range visualization, narrow-space inspection, and compact OEM imaging tools.
D1.6 means the camera front end is designed for very small openings and narrow installation spaces. It is useful when the device cannot fit a larger 3mm, 4mm, or 5mm endoscope camera module.
The module supports 700×700@30fps with YUV / MJPEG output. It should be selected for micro endoscope visualization rather than high-resolution long-distance imaging.
Yes. The module integrates 4pcs 01005 LED for close-range illumination. Adjustable brightness can be reviewed as a customized requirement.
This model is designed with an IP67 structure direction. Final suitability should be reviewed according to the complete Shell, sealing method, cable outlet, and application conditions.
It can be evaluated for dental, ENT, veterinary, and other medical visualization devices. Any medical-related project should confirm regulatory, safety, cleaning, Shell, and system-level requirements separately.
Cable length and connector structure can be reviewed according to the target device. The standard direction includes 2m cable length, 3m maximum line length, and Type C / Micro USB back connector options.
Please share your target device type, required Diameter, working distance, FOV requirement, cable length, connector type, lighting requirement, IP rating requirement, installation space, host platform, and expected application. This helps evaluate whether the standard module is suitable or whether a customized version should be reviewed.
CTA◢
To evaluate this 1.6mm illuminated configuration, please share the entry diameter, target distance, lighting condition, required protection, cable route and host connection. We can then check whether the standard D1.6 design fits or whether another mechanical / optical direction should be evaluated.
