These modules implement H.265 compression for 4K/30fps streaming at 8Mbps bandwidth, compatible with 5G networks. The integrated IMU (Inertial Measurement Unit) stabilizes images during handheld operation, reducing motion blur by 72%. Field tests in rural clinics demonstrate 83% diagnostic concordan
Although low-resolution endoscopes have relatively low pixels, they have irreplaceable advantages in specific application scenarios, mainly reflected in the following aspects:1. Miniaturization and high adaptability The probe diameter can be as small as 2.8mm or even smaller, and it can reach narro
The choice between side view and direct view of the endoscope camera module for image output mainly depends on your inspection requirements. Direct-view lenses are suitable for large-scale inspections in open Spaces, such as the inner walls of pipes or engine blocks. They offer a wide field of view
The compatibility of endoscope camera modules with ordinary endoscope systems (e.g., Olympus or Storz) depends on several technical factors:Physical Interface CompatibilityMost endoscope camera modules are designed with standardized C-mount or other industry-standard interfaces that allow integrati
Why are high-resolution industrial endoscope camera modules more prone to overheating?At present, when industrial endoscopes are upgraded to 4K/60fps, the power consumption of the chip surges. For instance, the power consumption of the IMX415 sensor reaches 1.2W, but the mirror tube with a diameter
Currently, the endoscope camera module can be equipped with both LED beads and fiber supplementary lighting . This composite design combines the advantages of both light sources to adapt to more complex inspection environments and improve imaging quality. The following are the key bases and techni
The integration of LED beads in the endoscope camera module is mainly based on three core requirements: space efficiency, optical control, and environmental adaptability. The specific advantages and technical principles are as follows:I. Optimization of Space Utilization RateMiniaturized packaging
Disposable endoscope modules are usually treated as medical waste and must strictly follow the following disposal procedures:1. Youdaoplaceholder0 Sealed packaging and sorting Immediately seal it in a dedicated medical waste packaging bag/container after use, mark it as "infectious Waste", and it i
The selection of the diameter of the endoscopic camera module should be comprehensively evaluated based on specific application scenarios, rather than simply pursuing the smallest size. The key considerations are as follows:I. The Core Value and Limitations of Small DiameterAdaptability in confined
In the selection process of endoscope camera modules, how to correctly strike a balance between resolution and clarity?At present, the endoscope camera module is the preferred option for shooting in narrow environments. However, when choosing an endoscope camera module, it is not the case that the h
Whether the internal camera module of the industrial pipeline inspection endoscope needs to be equipped with an infrared LED lamp should be determined through a comprehensive assessment based on the inspection scenario requirements and the characteristics of infrared technology.
In the current industrial inspection and clinical medical fields, the application of endoscopes has become very widespread. However, there are significant differences in how these two fields should choose the appropriate endoscopes. The following is a comprehensive analysis of the selection of endos
The importance of advanced tools in modern maintenance and repair work cannot be overstated, particularly when it comes to inspecting hard-to-reach or hidden systems.
This professional-grade 3.9mm endoscope camera delivers 720P resolution at 60fps, paired with multi-coated lenses and high-brightness LEDs for crisp, low-noise imaging in challenging environments. Its DSP processor enables real-time noise reduction and color optimization, while electronic stabilizat
This innovative endoscope camera module combines a specialized BF2013 CMOS sensor with six integrated LED beads, delivering sharp 653×493 resolution video at 30 FPS even in low-light conditions. Designed for extreme environments, its 2mm-diameter probe and 60mm length allow access to tightly confine
This miniature endoscope camera is equipped with the OV97342 chip, featuring both high precision and miniaturization. Its 1-megapixel sensor supports a high-definition resolution of 1280×720. Combined with an 88° wide field of view, it can clearly capture details within a depth range of 10-40mm, making it suitable for operations in narrow Spaces.
The 3.5mm industrial-grade endoscope module is designed for complex mechanical inspection, equipped with OV9734 sensor output 1280×720 HD image quality, and smooth 30FPS transmission via USB interface. Its six ring leds provide shadowless lighting with an 88° wide-angle field of view, which can clea
The 3.5mm industrial-grade endoscope module is designed for complex mechanical inspection, equipped with OV9734 sensor output 1280×720 HD image quality, and smooth 30FPS transmission via USB interface. Its six ring leds provide shadowless lighting with an 88° wide-angle field of view, which can clea
In modern plumbing and drainage maintenance, efficiency, precision, and minimal invasiveness are essential.
In today's fast-paced world, real-time mobile inspection has become an invaluable tool across various industries.
Availability: | |
---|---|
Quantity: | |
SF-C016USB-D0.9-Side
SINCEREFIRST
This 0.9mm ultra-fine side-view USB borescope camera module utilizes a high-strength optical plastic lens that provides excellent impact resistance and durability while maintaining 0.175mm ultra-fine imaging accuracy. Equipped with USB2.0 plug-and-play interface, the module is compatible with Windows, macOS, Linux, and Android systems. Its innovative 90° lateral imaging structure with 3-30mm intelligent zoom range can easily complete a full range of operations from microscopic defect detection to medium- and long-distance inspection. The plastic lens with special coating process is not only lightweight and low-cost, but also has excellent light transmission and scratch resistance, which has better performance in industrial, medical, and engine inspection. |
1. Ultra-fine inspection capability:
0.9mm ultra-fine diameter probe with 90° side-view design, can penetrate into the extreme narrow space that traditional equipment can not reach
0.175mm ultra-macro focusing accuracy, can clearly identify hairline-level microscopic defects
2. Superior Durability:
High-strength optical plastic lens with special coating combines impact and scratch resistance with lightweight features
1. Industrial Inspection and Precision Manufacturing: 0.175mm ultra-high imaging accuracy can identify tiny solder joint defects, circuit board shorts or component misalignment, suitable for semiconductor, chip packaging and other precision manufacturing fields.
2. Minimally invasive surgical assistance: ultra-fine diameter (0.9mm) can enter the body's natural cavities (such as the ear canal, nasal cavity), assisting the doctor to carry out accurate diagnosis or surgical navigation.
3. Engine internal inspection: 3-30mm intelligent zoom can flexibly inspect fuel nozzles, turbine blades and other key components, early detection of carbon deposits or corrosion problems.
Product Name | Side-view endoscope camera module |
Basic tolerance | ±0.1mm |
DSP | USB2.0 |
Sensor | OCHFA10 |
Focusing Range | 3-30mm |
Focal Length | 0.175mm |
F Number | 4.5 |
FOV(H*V) | 100°*100° |
TV Distortion | <-11% |
Connector | Mini USB-5P |
1. What is the minimum system requirement for this module to function properly?
This module requires a device with USB 2.0 or higher interface and a processor with at least 1.5GHz clock speed. It is compatible with Windows 7/10/11 (32/64-bit), macOS 10.12+, and Linux distributions with UVC support. A minimum of 2GB RAM and 500MB storage space is recommended for smooth operation of the accompanying software.
2. Is this module suitable for use in wet or dusty environments?
While the main control unit is not waterproof, the detachable probe is available with optional IP67-rated waterproof casing (sold separately). For dusty environments, we recommend using the protective rubber sleeve accessory to prevent particle ingress while maintaining full functionality. The LED lighting system is sealed and can operate normally in these conditions.
3. Can the brightness of the lighting system be adjusted?
Yes, the brightness of the lighting system can usually be adjusted. You can adjust the lighting brightness through the operation interface on the connected device or the control buttons on the module itself (if available) to adapt to different inspection environments.
This 0.9mm ultra-fine side-view USB borescope camera module utilizes a high-strength optical plastic lens that provides excellent impact resistance and durability while maintaining 0.175mm ultra-fine imaging accuracy. Equipped with USB2.0 plug-and-play interface, the module is compatible with Windows, macOS, Linux, and Android systems. Its innovative 90° lateral imaging structure with 3-30mm intelligent zoom range can easily complete a full range of operations from microscopic defect detection to medium- and long-distance inspection. The plastic lens with special coating process is not only lightweight and low-cost, but also has excellent light transmission and scratch resistance, which has better performance in industrial, medical, and engine inspection. |
1. Ultra-fine inspection capability:
0.9mm ultra-fine diameter probe with 90° side-view design, can penetrate into the extreme narrow space that traditional equipment can not reach
0.175mm ultra-macro focusing accuracy, can clearly identify hairline-level microscopic defects
2. Superior Durability:
High-strength optical plastic lens with special coating combines impact and scratch resistance with lightweight features
1. Industrial Inspection and Precision Manufacturing: 0.175mm ultra-high imaging accuracy can identify tiny solder joint defects, circuit board shorts or component misalignment, suitable for semiconductor, chip packaging and other precision manufacturing fields.
2. Minimally invasive surgical assistance: ultra-fine diameter (0.9mm) can enter the body's natural cavities (such as the ear canal, nasal cavity), assisting the doctor to carry out accurate diagnosis or surgical navigation.
3. Engine internal inspection: 3-30mm intelligent zoom can flexibly inspect fuel nozzles, turbine blades and other key components, early detection of carbon deposits or corrosion problems.
Product Name | Side-view endoscope camera module |
Basic tolerance | ±0.1mm |
DSP | USB2.0 |
Sensor | OCHFA10 |
Focusing Range | 3-30mm |
Focal Length | 0.175mm |
F Number | 4.5 |
FOV(H*V) | 100°*100° |
TV Distortion | <-11% |
Connector | Mini USB-5P |
1. What is the minimum system requirement for this module to function properly?
This module requires a device with USB 2.0 or higher interface and a processor with at least 1.5GHz clock speed. It is compatible with Windows 7/10/11 (32/64-bit), macOS 10.12+, and Linux distributions with UVC support. A minimum of 2GB RAM and 500MB storage space is recommended for smooth operation of the accompanying software.
2. Is this module suitable for use in wet or dusty environments?
While the main control unit is not waterproof, the detachable probe is available with optional IP67-rated waterproof casing (sold separately). For dusty environments, we recommend using the protective rubber sleeve accessory to prevent particle ingress while maintaining full functionality. The LED lighting system is sealed and can operate normally in these conditions.
3. Can the brightness of the lighting system be adjusted?
Yes, the brightness of the lighting system can usually be adjusted. You can adjust the lighting brightness through the operation interface on the connected device or the control buttons on the module itself (if available) to adapt to different inspection environments.