SF-SJT720 is a D7.9 integrated USB endoscope camera module with a three-lens structure.
It uses the OV9734 1MP sensor and supports YUV / MJPEG output.
It is best positioned as a three-lens USB endoscope camera module for multi-angle close-range visual inspection.
The catalog notes “Three lens” and lists 80°×3 FOV.
This means the model should be evaluated for multi-direction viewing rather than only front-view inspection.
The catalog lists D7.9.
Customers should confirm the final probe diameter after housing and mechanical integration.
The catalog lists OV9734.
The model is listed as 1MP.
The catalog lists YUV / MJPEG.
The catalog snippet does not clearly list the output resolution or frame rate for SF-SJT720.
Customers should confirm this before making final product claims.
Yes.
The catalog lists 2+6pcs LEDs.
No.
The catalog marks dimming as No.
Customers should test brightness, shadow, reflection and lighting balance across the useful viewing directions.
The catalog lists 80°×3.
The exact optical layout should be confirmed during sample evaluation.
No.
It should not be described as a single ultra-wide lens.
It is better understood as a three-lens viewing structure with 80° listed for each direction.
The catalog lists 20–60mm.
Not based on the listed focusing range.
If the target is normally closer than 20mm, another model should be evaluated.
The listed focusing range ends at 60mm.
If the application needs farther viewing, another module may be more suitable.
No.
The catalog marks IP67 as No.
Not as a confirmed waterproof module.
Wet pipe applications require final device sealing validation or another IP67-supported module.
The catalog lists Type-A.
No.
Compatibility still depends on the host system, software, USB support and power design.
Yes, it can be evaluated for dry industrial inspection tasks where multi-angle viewing is useful.
It should not be selected for AI inspection based only on 1MP output or three-lens structure.
AI applications require project-specific image validation.
It can only be evaluated as an imaging component where appropriate.
Final compliance and safety requirements must be handled at complete-device level.
The most common mistake is choosing it only because it has three lenses without checking working distance, lighting, viewing direction and IP67 requirements.
Provide application, target direction, working distance, cavity size, surface material, waterproof requirement, host device and expected production volume.
SF-SJT720 is best for OEM customers who need a three-lens USB endoscope camera module for multi-direction close-range visual inspection, not for waterproof, dimmable or high-resolution applications.
